Bicycle Assembly

How much Assembly is required?

We've shot assembly videos and written step by instructions to make assembling your new beach cruiser and accessories as easy as possible. The videos are listed first, if you scroll down to the bottom you will find photos with step by step written instructions. We are adding new assembly videos everyday, if you have a suggestion for an assembly video let us know.

Send an email to If you haven't received your cruiser yet and are just wondering how much assembly is required, watch the first video titled How much assembly is required?

What are You Looking to Assemble?

Everything you need to assemble your bike is here! Each video will walk you through all the necessary steps to get your bike assembled and ready to ride. Lets go over some of the tools that you might need to get started:

  • Scissors or Wire Snips
  • 8,10,13,and 15mm Crescent Wrench (Socket wrenches also applicable in some cases)
  • 5 and 6mm Allen Wrench
  • Phillips Head Screw Driver
  • Schrader Valve Bicycle Pump
  • Grease (recommended, but not required)

Assembly from Start to Finish

We will help you assemble your bike from start to finish.

Front and Rear Fenders

Assemble your front and rear fenders

Changing a Bicycle Tube

Remove your tires off the frame or form and replace tube

Front and Rear Handbrake Assembly

Assemble and tension your front and rear handbrake

Tuning a Multi-Speed Bike (Derailleur)

Tune your Multi-Speed deraileur for smooth shifting

Tuning a Shimano Internal 3 Speed

Tune your Shimano Deraileur for smooth shifting

Adjust SRAM Internal 3 Speed Hubs

Ajdjust your SRAM Internal 3 Speed Hub

Remove Wheel with Internal Hub

Remove your rear wheel with an Internal Hub

Tightening Chain on a Beachbike

Tighten your bike chain for smooth riding

Replacing the fork

Swap out your fork for adjustments